CURRICULUM VITAE

Name: Vida

Surname: Khalili

Gender: Female

Date and Place of Birth: 1985, Bonab, East Azerbaijan, Iran

Marital Status: Married

Number of children: 0

Address:

Tel: 

E-Mail: vida.khalili@gmail.com, v_khalili@sut.ac.ir, v.khalili@bonabu.ac.ir

Nationality: Iranian

Education:

PhD. In Materials Engineering; Advance materials and corrosion of metallic implants, first honor (average: 19.34 out of 20); Sahand University of Technology, Tabriz, East Azerbaijan, Iran (Received on 17^th June, 2015).

Thesis title: Development of HA-Si-CNTs Composite Coatings on NiTi Using Combination of Electrophoretic Deposition Method and Reactive-Bonding Process for Biomedical Applications (Evaluation grade: 19.93 out of 20).

Visitor researcher at: Chair of Materials Science, Department of Materials, Faculty of Mechanical Engineering, Ruhr-Universität Bochum, Bochum, Germany  (March 2014 –January 2014).

M. Sc. In Materials Engineering; Materials Selection and Characterization, Top student, second honor (average: 17.66 out of 20), Sahand University of Technology, Tabriz, East Azerbaijan, Iran (Received in 2010).

Thesis title: Development of Hydroxyapatite Coatings on Modified Surface NiTi Shape Memory Alloys by Immersion Methods

B. Sc. In Materials Engineering, Top student, second honor (average: 16.67out of 20), Sahand University of Technology, Tabriz, East Azerbaijan, Iran (Received in 2008).
 

Publications:

Journal papers:

V. Khalili, J. Khalil-Allafi, H. Maleki-Ghaleh, Characterization of HA-Si Composite Coatings on NiTi for Biomedical Applications, Surface Engineering, Surface Engineering 30 (2014) 212-217.

DOI: http://dx.doi.org/10.1179/1743294413Y.0000000242

 V. Khalili, J. Khalil-Allafi, H. Maleki-Ghaleh ,Titanium  Oxide  (TiO2)  Coatings  on  NiTi  Shape  Memory  Substrate  Using Electrophoretic Deposition Process, International Journal of Engineering A: Basics   26 ( 2013) 707-712.

DOI: http://www.ije.ir/Vol26/No7/A/5.pdf 

H. Maleki-Ghaleh, V. Khalil, J. Khalil-allafi, M. Javidi, Hydroxyapatite coating on NiTi shape memory alloy by electrophoretic deposition process, Surface & Coatings Technology 208 (2012) 57–63.

DOI: 10.1016/j.surfcoat.2012.08.001

H. Maleki-Ghaleh, J. Khalil-allafi, V. Khalil, M.S. Shakeri, M. Javidi, Effect of hydroxyapatite coating on corrosion behavior and nickel release of NiTi shape memory alloy fabricated by EPD method, Materials and Corrosion, Materials and Corrosion 64 (2013) 1-8.

DOI: 10.1002/maco.201206950

V. Khalili, J. Khalil-Allafi, H. Maleki-Ghaleh, Hydroxyapatite Coatings for NiTi Implants, Iranian Journal of Biomedical Engineering 6 (2012) 9- 15.

DOI:http://www.ijbme.org/article_13093_2115.html

V. Khalili, J. Khalil-Allafi, H. Maleki-Ghaleh, Bioactive HA/CNTs composite Coatings on the NiTi implants, Iranian Journal of Biomedical Engineering 6 (2012) 231- 238.

DOI: http://www.ijbme.org/article_13119_2115.html 

H. Maleki-Ghaleh, J. Khalil-allafi, V. Khalil, M. Javidi, Electrophoretic deposition of Hydroxyapatite on NiTi shape memory alloy, Iranian Journal of Surface Engineering 13 (2012) 25–32.

DOI: http://www.surfacejournal.ir/article_5351_1108.html

E. Karimi, J. Khalil-allafi, V. Khalil, Electrophoretic deposition of double layer HA/Al composite coating on NiTi, Materials Science and Engineering C 58 (2016) 882–890.

DOI: 10.1016/j.msec.2015.09.035

Vida Khalili, Jafar Khalil-Allafi, Hossein Maleki-Ghaleh, Alexander Paulsen, Jan Frenzel, Gunther Eggeler, The influence of Si as reactive bonding agent in the electrophoretic coatings of HA-Si-MWCNTs on NiTi alloys, Journal of Materials Engineering and Performance, Accepted.

Vida Khalili, Jafar Khalil-Allafi, Wei Xia, Alirez B. Parsa, Jan Frenzel, Christoph Somsen, Gunther Eggeler, Preparing HA-Si composite suspensions with homogeneous distribution of multi-walled carbon nanotubes for electrophoretic coating of NiTi bone implant, Materials Science and Engineering C, Under review of revised form.

Vida Khalili, Jafar Khalil-Allafi, Christina Sengstock, Yahya Motemani, Alexander Paulsen, Jan Frenzel, Gunther Eggeler, Manfred  Köller, Characterization of mechanical properties of hydroxyapatite-silicon multi walled carbon nano-tubes composite coatings synthesized by EPD on NiTi alloys for biomedical application, Acta Biomaterialia, Under review.
 

Selected International and National conference papers:

V. Khalili (talker), J. Khalil-Allafi, R. Tavangar, Nano indentation behavior of HA-Si-MWCNTs composite coating developed using electrophoretic deposition on NiTi bone implant, Proceedings of the 6^th International Conference on Nanostructures (ICNS6)7-10 March 2016, Kish Island, Iran. 

V. Khalil, J. Khalil-allafi, H. Maleki-Ghaleh, Fabrication of HA-Si-CNTs composite coatings on NiTi alloys by combination of electrophoretic deposition and reaction bond sintering for biomedical application, 14th National Conference on Surface Engineering, University of Isfahan, Isfahan, Iran, October 2013.

V. Khalil, J. Khalil-allafi, H. Maleki-Ghaleh, H. Hasani-Ardakani, M. Javidi, Investigation of bioactive hydroxyapatite coatings on the NiTi implants, 18th Iranian Conference on Biomedical Engineering, Tarbiat Modares University, Tehran, December 2011. (Selected as top article)

V. Khalil, J. Khalil-allafi, H. Maleki-Ghaleh, Effect of TiO2 nanoparticles on the surface morphology and drying behavior of HA-TiO2 composite coating by electrophoretic method NiTi alloy, 13th National Conference on Surface Engineering, University of Tabriz, Tabriz, Iran, May 2012. (Selected as top article)

V. Khalil, J. Khalil-allafi, H. Maleki-Ghaleh, Hydroxyapatite Coatings on NiTi alloy using electrophoretic: effect of inner layer of TiO2 on the quality of  hydroxyapatite coating, 12th National Conference on Surface Engineering, Malek ashtar University of Technology, Isfahan, Iran, May 2011.

H. Maleki-Ghaleh, J. Khalil-allafi, V. Khalil, M. Javidi, Effect of applied voltage on the quality HA coating on NiTi alloy during electrophoretic deposition, The first Technical Conference of Electrophoretic Deposition, Materials and Energy Research Center, Karaj, Iran, December 2011.

J. Khalil-allafi, H. Maleki-Ghaleh, V. Khalil, Shima Nakisa, M. Javidi, Evaluation of the electrochemical behavior and nickel ions release from modified surface of NiTi alloy in SBF, 19th Iranian Conference on Biomedical Engineering, Amirkabir University of Technology, Tehran, December 2012.

H. Maleki-Ghaleh, J. Khalil-allafi, V. Khalil, M. Javidi, Hydroxyapatite-Alumina composite coatings on NiTi alloy, 13th National Conference on Surface Engineering, University of Tabriz, Tabriz, Iran, May 2012. 

V. Khalil, J. Khalil-allafi, S. Noori, Hydroxyapatite coating on NiTi alloy by sol – gel, 12th National Conference on Surface Engineering, Malek ashtar University of Technology, Isfahan, Iran, May 2011.
 

National Patent:

Patent title: Hydroxyapatite/Aluminum composite coating on NiTi alloy implants by electrophoretic process, Number: 027243 الف/89
 

National research project:

Title: Using metal advanced materials (Shape memory alloys) in airline industry

Project manager: Prof. Jafar Khalil-Allafi, Collaborator: Vida Khalili

Industrial Project:

Title: Evaluation the wear and corrosion resistance of gripper parts of crusher belong to Morvarid iron ore processing factory

Project managers: Vida Khalili, Shima Nakisa

M. Sc. Thesis advised:

1- "Hydroxyapatite/Carbon Nano Tubes composite coating on NiTi alloy implants by electrophoretic process ", Leila Nemati, M.Sc. thesis, January 2015.

2- " Hydroxyapatite/Titanium Oxide gradient coating on NiTi alloy implants by electrophoretic process ", Mehdi Hedayatfar, M.Sc. thesis, March 2014.

3- "Study of Hydroxyapatite/Zirconia composite coating on NiTi alloy", Zahra Hejrani-Shad, M.Sc. thesis, January 2014.

4- "Hydroxyapatite/Aluminum composite coating on NiTi alloy implants by electrophoretic process", Esmaeil Karimi, M.Sc. thesis, Desember 2013.

Proficiency:

Corrosion (Ivium Instrument)

Topography study using AFM (CSM Instrument)

Topography study using SEM (FEI, Quanta FEG650)

Phase study using XRD (PANalytical, XPERT MOD) and EBSD (ZEISS, LEO 1530VP)

Mechanical study using Nano Indentation and Nano Scratch (CSM Instrument)

Study of apatite formation ability in Simulated Body Fluid

Extraction of HA from bovine cortical bone

Tissue Engineering

Honors:

First honor Ph.D.  Student at Faculty of Materials Engineering, Sahand University of Technology, 2015.

Top researcher Honor in 13th National Conference on Surface Engineering, 2012.

Top researcher Honor in 18th Iranian Conference on Biomedical Engineering, 2011.

Second honor MS.  Student at Faculty of Materials Engineering, Sahand University of Technology, 2010.

Second honor BS.  Student at Faculty of Materials Engineering, Sahand University of Technology, 2008.

Teaching experiences:

Thermodynamics of Materials

Metal forming

Metallography Laboratory

Corrosion and Coating Laboratory

Research Interests:

Biomaterials, NiTi Shape Memory Alloys, coatings, Bone implant, corrosion,   Biodegradable implant, Nanomaterials
 

Language Skills:

Turkish (native)

Persian (native)

English (fluent)

German (familiar)

Arabic (familiar)

References:

Supervisor of B.Sc., M.Sc. and PhD. Thesis:

Prof. Jafar Khalil-allafi, Professor and Head of the Advance Materials Research Center, Dean of the Department of Materials Engineering, Sahand University of Technology, Tabriz, Iran, Graduated from University of Bochum, Germany.

Phone: +98-41-33459454

 Fax: +98-41-33444333

Email: allafi@sut.ac.ir 
 

Advisor of PhD. Thesis:

Prof. Farhang Abbasi, Professor of Polymer Engineering, Head of Institute of Polymeric Materials, Sahand University of Technology, Postal Code: 5331711111, New Town of Sahand, Tabriz, IRAN

Phone/Fax: +98-41-33459090

E-mail: f.abbasi@sut.ac.ir

Host supervisors at RUB:

Prof. Dr.-Ing. Gunther Eggeler, Chair of Materials Science (WW), Institute of Materials, Department of Mechanical Engineering, Ruhr-Universität Bochum, Universitätsstr. 150, D-44780 Bochum building ICFO, Level 04, Room 311

Phone: +49 (0) 234 32-23022

Fax: +49 (0) 234 32-14235

E-mail: gunther.eggeler@ruhr-uni-bochum.de

Dr.-Ing. January Frenzel, Chair of Materials Science, Department of Materials, Faculty of Mechanical Engineering, Ruhr-Universität Bochum, Universitätsstr. 150, 44780 Bochum building ICFO, Level 04, Room 323

Phone: +49 (0) 234 32-22547

Fax: +49 (0) 234 32-14235

Email: jan.a.frenzel@ruhr-uni-bochum.de